Failed command: WRITE FPDMA QUEUED. Brand New Samsung SSD Drive errors

I’ve installed a fresh version of Ubuntu 20.04.2 yesterday on a new 500gb Samsung 860 SSD, all updated. I was checking the syslog, “cat syslog | grep fail”

And I found lots of these

Mar 6 08:12:36 plex kernel: [ 5610.512841] ata1.00: irq_stat 0x40000009
Mar 6 08:12:36 plex kernel: [ 5610.512878] ata1.00: failed command: WRITE FPDMA QUEUED
Mar 6 08:12:36 plex kernel: [ 5610.512930] ata1.00: cmd 61/00:40:d0:4c:37/01:00:33:00:00/40 tag 8 ncq dma 131072 out
Mar 6 08:12:36 plex kernel: [ 5610.512930] res 40/00:00:d0:61:37/00:00:33:00:00/40 Emask 0x1 (device error)
Mar 6 08:12:36 plex kernel: [ 5610.513055] ata1.00: status: { DRDY }
Mar 6 08:12:36 plex kernel: [ 5610.513089] ata1.00: failed command: WRITE FPDMA QUEUED
Mar 6 08:12:36 plex kernel: [ 5610.513140] ata1.00: cmd 61/00:48:d0:4d:37/0a:00:33:00:00/40 tag 9 ncq dma 1310720 ou
Mar 6 08:12:36 plex kernel: [ 5610.513140] res 40/00:00:d0:61:37/00:00:33:00:00/40 Emask 0x1 (device error)
Mar 6 08:12:36 plex kernel: [ 5610.513264] ata1.00: status: { DRDY }

and 3 of these

ata1.00: failed command: READ FPDMA QUEUED
Mar 6 09:47:23 plex kernel: [ 1404.063654] ata1.00: failed command: READ FPDMA QUEUED
Mar 6 09:47:23 plex kernel: [ 1404.063861] ata1.00: failed command: READ FPDMA QUEUED

and these

ata1.00: failed command: WRITE FPDMA QUEUED
Mar 6 08:27:11 plex kernel: [ 281.098527] ata1.00: failed command: WRITE FPDMA QUEUED
Mar 6 08:27:11 plex kernel: [ 281.098658] ata1.00: failed command: WRITE FPDMA QUEUED
sata1.00: exception Emask 0x1 SAct 0xfff00 SErr 0x0 action 0x0loads of these.

I’ve looked to see if there are any particular drivers for the Disk.

But do I have a duff disk or is the motherboard a little too old (5-is years I think, it’s an old ESXi server)?

Thanks


Go to Source of this post
Author Of this post: Jujuh
Title Of post: Failed command: WRITE FPDMA QUEUED. Brand New Samsung SSD Drive errors
Author Link: {authorlink}